Mounting connector for 5 - 15 mm cable O.D. range Více >>
Výrobce: Neutrik. Kód produktu: 30208543

93 Kč s DPH

Do 3-5 dní POZOR - DOSTUPNOST REÁLNĚ 5 PRACOVNÍCH DNÍ
ks
Industrial Connectors / PowerConLocking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. Fast and easy locking system. High current capacity (20 A rated). Extremely robust and reliable. Meets all prevailing safety standards. UL recognized, VDE certified and SEV approved. Very good cable handling and protection. Note: The PowerCon is a connector without breaking capacity, i.e. the PowerCon should not be connected or disconnected under load or live!
Mounting connector for 5 - 15 mm cable O.D. rangePremating safety ground
Quicklock with securing lever
With the two non-interchangeable types of connectors (A-type, B-type) it is impossible to produce a short circuit
Appropriate plugs are identified by mechanical keyways and by color
Connector type: Powercon (gray)
Plug construction: Mounting version
Made in Europe

IP classification: IP20
Weight: 0,01 kg
Number of contacts: 2 + PE
Rated current per contact: 20 A RMS
Rated voltage: 250 V AC
Dielectric strength: 4000 V DC
Contact resistance:
Insulation resistance after damp heat test: >,100 Mohms
Creepage distance: according to IEC 664-1
Cable retention force: = 220 N, depending on cable dia and material
Wiring: Flat tabs for FASTON 4.8 mm x 0.5 mm (0.187'' x 0.02'') or soldering
Solderability: complies with IEC 68-2-20
Housing: PA 6 30% GR
Insert: PA 6 30% GR
Contacts: CuZn39Pb3 / CuSn6
Contact surface: L+N 20 m Ag plated, Earth 4 m Ag plated
Chuck: POM
Temperature range: -30C to +80C
Flammability: UL94HB
Kontaktujte nás!